diamond cable saw

The application of diamond cable saw to mining and processing stone has a history of more than 30 years in foreign countries. In the early stage, the rope saw only used to cut soft stone, and applied diamond cable saw to mining marble mine in the world has been very mature. And the technology of rope saw machine used in the exploitation of granite and other hard stones is more and more mature. At present, it has been applied in the exploitation and processing of granite, sandstone and other hard stones.
There are a certain number of beads of diamond on a multi-strand diamond cable saw in proportion. The diamond cable saw processing is jointly completed by the diamond string used for direct cutting and the corresponding mechanical equipment that drives the string movement (i.e., the rope saw machine). Before processing, the copper sleeve and other docking sets are used to connect the end and end of a certain length of string to form a closed circle. During the processing, the closed ring string on the guide wheel of the rope saw machine is tensioned, driven by the driving force, the string moves at high speed, and the cutting is realized through the grinding movement of beads.
Installation and adjustment of diamond cable saw
1. The diamond cable saw is installed on the rope saw machine, and the diamond cable saw is relatively tensioned. Pull the diamond cable saw by hand to see if the diamond string saw is rotating uniformly. In the case of uniform rotation, the next operation can be carried out; Otherwise, check.
2. Start the equipment and observe the jiggling state of diamond string saw. If the bead saw jiggles badly, the processing and installation accuracy of flywheel and guide wheel should be checked. Otherwise, it will easily cause fatigue fracture of diamond string saw.