metal cutting wire saw

As we know, the diamond wire saw machine has been widely used in the cutting of marble, granite and other stone materials. But, as you may not know, the rope saw can cut steel and concrete, and even metal, in addition to cutting marble and granite! In this article, we will introduce in detail how the rope sawing machine performs metal cutting saw.

Can a Diamond rope saw cut all the metal? Or can only cut the specified metal? In theory, because diamonds are the hardest substance in the world, everything should be able to cut. But we need to look at this from a market perspective. Not all cutting is done by a rope saw.

We have a lot of foundry, the foundry in the process of pouring, will leave a lot of tailings, so to speak, iron slag. The volume of these tailings is usually very large, especially for large casting factories, some of the tailings and wastes will weigh dozens of tons. Thousands of tons of tailings are left over after long production. This is undoubtedly a huge waste.

Let's take a look at the following pictures, which show the waste left over from the production process of the foundry.

Recycling of waste is what every foundry wants. However, because the waste is too large and the furnace mouth is too small, the waste cannot be put back into the furnace for re-use. So people have been wondering if there is any way to cut the waste material, cut the huge metal into small pieces, and then smelt it.

The diamond rope saw worked at this time. For successful metal cutting, the rope saw must use an 8p motor. Then the special metal cutting saw can work properly. An ordinary rope saw cannot be cut. The metal cutting saw used in kanghua rope saw machine is made by special technology. As long as the holes in the metal tailings are allowed, the kanghua rope sawing machine can do a good job.